EasyHeat AHB-130 30 ft Heating Cable Pipe

Count on the AHB series for water pipe heating cable that’s ready to use out of the box. An integral energy saving thermostat controls the AHB cable to automatically protect water pipes when the temperature dips into the critical range. There’s no easier, more effective do it yourself solution for safeguarding water pipes in cold climates.
Available in 3 ft (0.9 m) increments up to 18 ft (5.5 m) and longer increments up to 80 ft (24.4 m)
Keeps water flowing at ambient temperatures down to -40 °F (-40 °C)
Cables are rated at 7 Watts per 1 ft (0.30 m)
Built-in thermostat turns on at +38 °F (+3 °C) or below and turns off at +45 °F (+7 °C) and above
Plugs into a standard 120 Vac outlet, must be GFCI protected
Each cable consists of tough XLPE inner insulation, a continuous ground braid and weather resistant PVC (high-low temperature) outer jacket
Protects metal and plastic water-filled pipes up to 1-1/2 in (38.1 mm) in diameter
Pre-assembled and ready to install
Integral thermostat saves e